Mach-5 is a cement based, interior, self smoothing or leveling underlayment that installs 3-5 times faster than multi-coat hand patching when applied at 1/16” or 1/8” using the CMP Nano-Rake & Finishing Tool.

Product Features

• Ideal for bucket or barrel mixing applications and pumping
• Can be installed over approved wood substrates
• Suitable for Low-Prep applications (Consult CMP Technical)
• Creates a super smooth surface ideal for sensitive floor coverings
• More economical than multi-coat hand patching
• Suitable over sound, Gypsum underlayment, Light Weight concrete & well bonded VCT
• Rapid-Ready Technology for fastest turnaround
• Very easy to apply without the imperfections associated with hand patching
• Super fluid (Up to 40% more fluid than traditional self-leveling)
• Will not harbor or support the growth of mold or mildew
• Environmentally friendly – Contributes points to LEED® Certified Projects

Lock-Down is a versatile,100% solids, epoxy resin system that can be used for vapor suppression, broadcast priming and crack repair. For vapor suppression applications, Lock-Down can be applied at two coverage rates. Both applications are rated for substrates with up to 100% RH as per ASTM F2170.

Lock-Down at 350 sq. ft. per KIT will reduce MVER of up to 15 lbs. to below 3 lbs. as per ASTM F1869. Lock-Down at 250 sq. ft. per KIT or (TOTAL Lock-Down) will reduce unlimited MVER to below 3 lbs. as per ASTM F1869. No moisture testing is required for application of the Total Lock-Down System.

Product Features

• Can be used for Vapor Suppression, Broadcast Primer or Crack Repair
• Can be applied over 5 day old GREEN concrete
• Broadcast priming will reduce cracks and pin holes in decorative or polished overlays
• Single coat system allows for next day installations
• Low viscosity for ease of installation and maximum penetration
• No moisture testing required with TOTAL Lock-Down System
• Can be used over substrates with in floor Radiant Heating
• No VOC’s, 0 g/L (per rule 1168)
• Alkalinity protection to pH 14
• Can be used Interior, Exterior, On, Above or Below grade
• Will not harbor or support the growth of mold or mildew
• Environmentally friendly – Contributes points to LEED® Certified Projects

Level -1 is a cement based, interior, self leveling underlayment that can be used to create a smooth, flat or level surface prior to the installation of floor coverings. Its extended working time, low shrinkage and superior leveling properties make it the ideal product for renovation and new construction projects.

Level -1 produces a hard durable surface that can be left open to normal construction traffic for up to one year before the installation of finished flooring and it can be feather edged to meet existing transitions.

Product Features

• Ideal for barrel mixing or pumping applications
• Can be left open to normal construction traffic for up to 12 months
• Can be installed from 1/4” – 3” Neat and to 5” properly extended
• Maintains healing and pour merging properties for up to 25 minutes
• Fast return to service; walkable in just 2-3 hours
• Compatible with all adhesives approved for concrete
• Can be Installed over 5 day old Green concrete
• Very Economical
• Will not contribute to the growth of mold or mildew
• No dangerous emissions or irritating fumes
• Environmentally friendly – Contributes points to LEED® Certified Projects

H2-O is a premium cement based self leveling / smoothing compound that can be poured as thin as a 1/16″. H2-O accepts common floor coverings in as little as two hours and will revolutionize the way floor prep is done. Contact your local representative for a demonstration.

CM-10 is a high-penetration Urethane that combines with sand to form a tough instant polymer concrete. This nearly water thin formula is designed to penetrate deep into the host concrete creating extremely high bond strengths, reinforcement of the repair area as well as permanent repairs.

CM-10 produces polymer concrete repairs that absorb the shock and transfers the load of heavy traffic without cracking or dis-bonding. It is highly chemically resistant and can be applied in a wide range of temperatures. It is excellent for industrial floor repairs subject to forklift traffic and harsh conditions.

Product Features

• Ideal for repairing spalled concrete, cracks, holes, and uneven concrete slabs
• Rapid turn-around time – return to service in just 10 minutes
• Freeze Thaw stable
• Does not require priming
• Can be used interior or exterior

CMP-1000 is a penetrating, colorless surface treatment which produces an invisible protective coating. It can also be used on stone, tile, marble and virtually any concrete substrate.

CMP-1000 also protects from a variety of stains including oil and serves as a water repellent.

Product Features

• Penetrates deep into substrate
• Very easy to apply
• Breathable
• Low odor
• Non-Flammable, Non-Toxic, Non Explosive
• Water based and VOC compliant
• No dangerous emissions or irritating fumes

White Patch is a rapid setting, high strength patch and skim coat. White Patch has a very creamy consistency and is easy to work with. It offers quick turn around with reliable results.

RampStar is an interior, quick setting underlayment, its excellent workability makes screeding, ramping or patching fast and easy. RampStar can be used over concrete, Terrazzo, ceramic or Quarry tile, epoxy coatings, non-water soluble adhesive residue and approved wood subfloors.

Installation of common floor coverings using water-based adhesives can proceed as soon as RampStar is hard enough to work on without damaging the surface. Moisture sensitive adhesives require *16 hrs.

Product Features

• Ideal for Screeding, Ramping, Patching & Skim coating
• Can serve as an interior wear surface with the application of a suitable coating
• Exceptional compressive strength – 6000 psi
• Can be applied over approved wood subfloors as directed
• Compatible with all adhesives approved for use on concrete
• Can be re-tempered without the addition of water
• Install flooring in as little as 1 hour
• From featheredge – 2” neat and 5” properly extended (CONCRETE:, NON POROUS:)
• Ideal basecoat for resilient flooring in heavy service environments, hospitals, supermarkets etc.
• Will not harbor or support the growth of mold or mildew
• Environmentally friendly – Contributes points to LEED® Certified Projects

PrepStar is a Cement based, rapid setting, trowel applied finishing underlayment used to smooth sub-floors prior to the installation of finished floor covering. It chemically combines with the mix water, avoiding associated installation problems and is compatible with all adhesives approved for use over concrete.

PrepStar allows for the installation of many floor coverings in as little as 15 minutes. It can be applied over concrete, wood, ceramic & Quarry tile, cement Terrazzo, and properly prepared cutback residue all without using a primer or additive.

Product Features

• Bonds to a wide variety of substrates
• Accepts flooring in as little as 15 minutes
• Creamy smooth workability
• Exceptional coverage
• Can be re-tempered without the addition of water
• Compatible with most flooring adhesives
• Will not harbor or support Mold or Mildew
• No dangerous emissions or irritating fumes
• Contributes up to 5 LEED® Points: MR 4.1, MR 4.2, MR 5.1, MR 5.2 and EQ 4.1

Grey Patch is a polymer modified, rapid setting, interior patching compound used to fill voids and smooth the surfaces of open concrete and approved wood underlayments without the use of a primer or additive Common floor coverings such as VCT and carpet can be installed in as little as *1 hour.

When mixed with PolyBond, the 2 – Coat “Skim-Bond System” also includes properly prepared burnished concrete, Cutback & non water soluble adhesive residue, cement Terrazzo, ceramic or Quarry Tile,
single layer, fully bonded, VCT and embossed, non-cushioned, residential, sheet vinyl.

Product Features

• Accepts flooring in as little as *1 hour
• Grey Patch and the “Skim-Bond System” require no priming
• Calcium Aluminate based for long term durability
• Workable for 15 minutes
• No dangerous emissions or irritating fumes
• Compatible with flooring adhesives
• Very Economical
• Will not harbor or support the growth of mold or mildew
• Environmentally friendly – Contributes points to LEED® Certified Projects