V-20 Plus

Epoxy Vapor and Oil Mitigation System

V-20 PLUS is a 2-component epoxy system capable of reducing MVER from up to 20 or 25 lbs. to less than 3 lbs. per ASTM F-1869 to effectively protect finished flooring. Its extremely dense, deep penetrating chemical matrix can block moisture, oil, radon and other contaminates from migrating through the surface of the substrate.

V-20 PLUS can be used on, above or below grade for both interior and exterior  applications and can be applied to “Green” concrete that is a least 5 days old.

Product Features

  • Single coat application, does not require a primer
  • Complete system (EB-Sand Included)
  • Reduces MVER from 25 lbs. to less than 3 lbs.
  • Can receive coatings in as little as12 hours
  • Blocks migration of oil, Radon and other contaminants
  • Works on both moist and 5 day old “Green” concrete
  • Will not support the growth of mold or mildew
  • Alkalinity protection to pH 14
  • Low VOC
  • Contributes up to 1 LEED® Point: MR 2.1

Project Estimator

Square Feet:

  1. Thickness:

  2. 16 mils

  1. Units:

Disclaimer: Project estimator is calculated by amount of square footage entered and divided by coverage listed on datasheet. However, Vapor application rates are based on a number of factors including Below or Above Grade, types of testing taken, temperature and several others. For application assistance please contact CMP Specialty Products at 215 540 8100.

Downloads